Please note that you are looking at an abridged version of the output (all checks that gave normal results have been removed from this report). You can have a look at the Full report instead.
260 BCT ( 263-) A -
In a colour picture, the residues that are part of a helix are shown in blue, strand residues in red. Preferred regions for helical residues are drawn in blue, for strand residues in red, and for all other residues in green. A full explanation of the Ramachandran plot together with a series of examples can be found at the WHAT_CHECK website.
Chain identifier: A
Coordinate problems, unexpected atoms, B-factor and occupancy checks
Warning: What type of B-factor?
WHAT IF does not yet know well how to cope with B-factors in case TLS has
been used. It simply assumes that the B-factor listed on the ATOM and HETATM
cards are the total B-factors. When TLS refinement is used that assumption
sometimes is not correct. The header of the PDB file states that TLS groups
were used. So, if WHAT IF complains about your B-factors, while you think
that they are OK, then check for TLS related B-factor problems first.
Obviously, the temperature at which the X-ray data was collected has some importance too:
Number of TLS groups mentione in PDB file header: 0
Crystal temperature (K) :298.000
Note: B-factor plot
The average atomic B-factor per residue is plotted as function of the residue
Chain identifier: A
Nomenclature related problems
Warning: Arginine nomenclature problem
The arginine residues listed in the table below have their N-H-1 and N-H-2
55 ARG ( 58-) A
4 TYR ( 7-) A 37 TYR ( 40-) A 48 TYR ( 51-) A 85 TYR ( 88-) A 124 TYR ( 128-) A 190 TYR ( 194-) A
127 PHE ( 131-) A 227 PHE ( 231-) A
29 ASP ( 32-) A 49 ASP ( 52-) A 69 ASP ( 72-) A 158 ASP ( 162-) A 171 ASP ( 175-) A 176 ASP ( 180-) A 186 ASP ( 190-) A 239 ASP ( 243-) A
23 GLU ( 26-) A 201 GLU ( 205-) A 210 GLU ( 214-) A 230 GLU ( 234-) A 232 GLU ( 236-) A 234 GLU ( 238-) A 235 GLU ( 239-) A
Atom names starting with "-" belong to the previous residue in the chain. If the second atom name is "-SG*", the disulphide bridge has a deviating length.
123 LYS ( 127-) A N -C 1.43 4.8
RMS Z-score for bond lengths: 0.472
RMS-deviation in bond distances: 0.011
Warning: Unusual bond angles
The bond angles listed in the table below were found to deviate more than 4
sigma from standard bond angles (both standard values and sigma for protein
residues have been taken from Engh and Huber [REF], for DNA/RNA from
Parkinson et al [REF]). In the table below for each strange angle the bond
angle and the number of standard deviations it differs from the standard
values is given. Please note that disulphide bridges are neglected. Atoms
starting with "-" belong to the previous residue in the sequence.
91 HIS ( 94-) A CG ND1 CE1 109.79 4.2 119 HIS ( 122-) A CG ND1 CE1 109.65 4.1 123 LYS ( 127-) A -O -C N 108.62 -9.0 123 LYS ( 127-) A -CA -C N 125.77 4.8
23 GLU ( 26-) A 29 ASP ( 32-) A 49 ASP ( 52-) A 55 ARG ( 58-) A 69 ASP ( 72-) A 158 ASP ( 162-) A 171 ASP ( 175-) A 176 ASP ( 180-) A 186 ASP ( 190-) A 201 GLU ( 205-) A 210 GLU ( 214-) A 230 GLU ( 234-) A 232 GLU ( 236-) A 234 GLU ( 238-) A 235 GLU ( 239-) A 239 ASP ( 243-) A
Improper dihedrals are a measure of the chirality/planarity of the structure at a specific atom. Values around -35 or +35 are expected for chiral atoms, and values around 0 for planar atoms. Planar side chains are left out of the calculations, these are better handled by the planarity checks.
Three numbers are given for each atom in the table. The first is the Z-score for the improper dihedral. The second number is the measured improper dihedral. The third number is the expected value for this atom type. A final column contains an extra warning if the chirality for an atom is opposite to the expected value.
Please also see the previous table that lists a series of administrative chirality problems that were corrected automatically upon reading-in the PDB file.
122 THR ( 125-) A C -9.8 -14.46 0.30 The average deviation= 1.002
124 TYR ( 128-) A 4.19
These scores give an impression of how `normal' the torsion angles in protein residues are. All torsion angles except omega are used for calculating a `normality' score. Average values and standard deviations were obtained from the residues in the WHAT IF database. These are used to calculate Z-scores. A residue with a Z-score of below -2.0 is poor, and a score of less than -3.0 is worrying. For such residues more than one torsion angle is in a highly unlikely position.
195 PRO ( 199-) A -2.6 57 LEU ( 60-) A -2.5 6 LYS ( 9-) A -2.5 108 LYS ( 111-) A -2.2 27 PRO ( 30-) A -2.2 180 LEU ( 184-) A -2.2 109 LYS ( 112-) A -2.1 89 GLN ( 92-) A -2.1 159 VAL ( 163-) A -2.0 172 PHE ( 176-) A -2.0
Residues with `forbidden' phi-psi combinations are listed, as well as residues with unusual omega angles (deviating by more than 3 sigma from the normal value). Please note that it is normal if about 5 percent of the residues is listed here as having unusual phi-psi combinations.
6 LYS ( 9-) A Poor phi/psi 26 SER ( 29-) A PRO omega poor 61 HIS ( 64-) A Poor phi/psi 72 ASP ( 75-) A Poor phi/psi 73 LYS ( 76-) A Poor phi/psi 108 LYS ( 111-) A Poor phi/psi 174 ASN ( 178-) A Poor phi/psi 197 PRO ( 201-) A PRO omega poor 199 LEU ( 203-) A Poor phi/psi 239 ASP ( 243-) A Poor phi/psi 248 LYS ( 252-) A Poor phi/psi chi-1/chi-2 correlation Z-score : -1.455
For this check, backbone conformations are compared with database structures using C-alpha superpositions with some restraints on the backbone oxygen positions.
A residue mentioned in the table can be part of a strange loop, or there might be something wrong with it or its directly surrounding residues. There are a few of these in every protein, but in any case it is worth looking at!
4 TYR ( 7-) A 0 16 ASP ( 19-) A 0 17 PHE ( 20-) A 0 21 LYS ( 24-) A 0 24 ARG ( 27-) A 0 25 GLN ( 28-) A 0 26 SER ( 29-) A 0 35 ALA ( 38-) A 0 47 SER ( 50-) A 0 50 GLN ( 53-) A 0 51 ALA ( 54-) A 0 55 ARG ( 58-) A 0 59 ASN ( 62-) A 0 61 HIS ( 64-) A 0 69 ASP ( 72-) A 0 70 SER ( 73-) A 0 72 ASP ( 75-) A 0 74 ALA ( 77-) A 0 77 LYS ( 80-) A 0 80 PRO ( 83-) A 0 81 LEU ( 84-) A 0 89 GLN ( 92-) A 0 100 GLN ( 103-) A 0 104 HIS ( 107-) A 0 106 VAL ( 109-) A 0And so on for a total of 116 lines.
Standard deviation of omega values : 3.915
Warning: Backbone oxygen evaluation
The residues listed in the table below have an unusual backbone oxygen
For each of the residues in the structure, a search was performed to find 5-residue stretches in the WHAT IF database with superposable C-alpha coordinates, and some restraining on the neighbouring backbone oxygens.
In the following table the RMS distance between the backbone oxygen positions of these matching structures in the database and the position of the backbone oxygen atom in the current residue is given. If this number is larger than 1.5 a significant number of structures in the database show an alternative position for the backbone oxygen. If the number is larger than 2.0 most matching backbone fragments in the database have the peptide plane flipped. A manual check needs to be performed to assess whether the experimental data can support that alternative as well. The number in the last column is the number of database hits (maximum 80) used in the calculation. It is "normal" that some glycine residues show up in this list, but they are still worth checking!
5 GLY ( 8-) A 2.59 17 3 GLY ( 6-) A 1.56 26
18 PRO ( 21-) A 0.10 LOW 195 PRO ( 199-) A 0.51 HIGH 246 PRO ( 250-) A 0.12 LOW
The contact distances of all atom pairs have been checked. Two atoms are said to `bump' if they are closer than the sum of their Van der Waals radii minus 0.40 Angstrom. For hydrogen bonded pairs a tolerance of 0.55 Angstrom is used. The first number in the table tells you how much shorter that specific contact is than the acceptable limit. The second distance is the distance between the centres of the two atoms. Although we believe that two water atoms at 2.4 A distance are too close, we only report water pairs that are closer than this rather short distance.
The last text-item on each line represents the status of the atom pair. If the final column contains the text 'HB', the bump criterion was relaxed because there could be a hydrogen bond. Similarly relaxed criteria are used for 1-3 and 1-4 interactions (listed as 'B2' and 'B3', respectively). BL indicates that the B-factors of the clashing atoms have a low B-factor thereby making this clash even more worrisome. INTRA and INTER indicate whether the clashes are between atoms in the same asymmetric unit, or atoms in symmetry related asymmetric units, respectively.
1 HIS ( 4-) A N <-> 261 HOH ( 340 ) A O 0.33 2.37 INTRA 5 GLY ( 8-) A O <-> 7 HIS ( 10-) A N 0.28 2.42 INTRA 12 HIS ( 15-) A CD2 <-> 15 LYS ( 18-) A NZ 0.27 2.83 INTRA BL 73 LYS ( 76-) A C <-> 261 HOH ( 376 ) A O 0.25 2.55 INTRA 73 LYS ( 76-) A NZ <-> 261 HOH ( 351 ) A O 0.21 2.49 INTRA BF 93 HIS ( 96-) A CE1 <-> 260 BCT ( 263-) A O2 0.15 2.65 INTRA 42 LYS ( 45-) A CG <-> 43 PRO ( 46-) A CD 0.10 3.10 INTRA 91 HIS ( 94-) A NE2 <-> 260 BCT ( 263-) A C 0.10 3.00 INTRA 245 GLN ( 249-) A NE2 <-> 261 HOH ( 380 ) A O 0.10 2.60 INTRA 251 GLN ( 255-) A N <-> 261 HOH ( 313 ) A O 0.06 2.64 INTRA 103 GLU ( 106-) A O <-> 261 HOH ( 419 ) A O 0.06 2.34 INTRA 30 ILE ( 33-) A N <-> 105 THR ( 108-) A O 0.06 2.64 INTRA BL 228 ASN ( 232-) A OD1 <-> 235 GLU ( 239-) A N 0.06 2.64 INTRA 98 ASP ( 101-) A OD1 <-> 223 ARG ( 227-) A NH2 0.05 2.65 INTRA 32 THR ( 35-) A O <-> 261 HOH ( 424 ) A O 0.04 2.36 INTRA 27 PRO ( 30-) A O <-> 245 GLN ( 249-) A N 0.04 2.66 INTRA BL 63 PHE ( 66-) A O <-> 261 HOH ( 334 ) A O 0.03 2.37 INTRA BL 72 ASP ( 75-) A OD1 <-> 86 ARG ( 89-) A NE 0.03 2.67 INTRA 121 ASN ( 124-) A ND2 <-> 261 HOH ( 326 ) A O 0.03 2.67 INTRA 114 GLU ( 117-) A OE2 <-> 116 HIS ( 119-) A NE2 0.02 2.68 INTRA BL 152 GLY ( 156-) A N <-> 261 HOH ( 293 ) A O 0.02 2.68 INTRA BL 9 GLY ( 12-) A O <-> 12 HIS ( 15-) A N 0.01 2.69 INTRA BL
Chain identifier: A
Warning: Abnormal packing environment for some residues
The residues listed in the table below have an unusual packing environment.
The packing environment of the residues is compared with the average packing environment for all residues of the same type in good PDB files. A low packing score can indicate one of several things: Poor packing, misthreading of the sequence through the density, crystal contacts, contacts with a co-factor, or the residue is part of the active site. It is not uncommon to see a few of these, but in any case this requires further inspection of the residue.
7 HIS ( 10-) A -5.93 97 LEU ( 100-) A -5.13
Chain identifier: A
Note: Second generation quality Z-score plot
The second generation quality Z-score smoothed over a 10 residue window
is plotted as function of the residue number. Low areas in the plot (below
-1.3) indicate unusual packing.
Chain identifier: A
Water, ion, and hydrogenbond related checks
Error: Water molecules without hydrogen bonds
The water molecules listed in the table below do not form any hydrogen bonds,
neither with the protein or DNA/RNA, nor with other water molecules. This is
a strong indication of a refinement problem. The last number on each line is
the identifier of the water molecule in the input file.
261 HOH ( 366 ) A O 261 HOH ( 375 ) A O Metal-coordinating Histidine residue 91 fixed to 1 Metal-coordinating Histidine residue 93 fixed to 1 Metal-coordinating Histidine residue 116 fixed to 1
12 HIS ( 15-) A 100 GLN ( 103-) A 249 ASN ( 253-) A
Hydrogen bond donors that are buried inside the protein normally use all of their hydrogens to form hydrogen bonds within the protein. If there are any non hydrogen bonded buried hydrogen bond donors in the structure they will be listed here. In very good structures the number of listed atoms will tend to zero.
Waters are not listed by this option.
9 GLY ( 12-) A N 19 ILE ( 22-) A N 28 VAL ( 31-) A N 49 ASP ( 52-) A N 71 GLN ( 74-) A N 97 LEU ( 100-) A N 126 ASP ( 130-) A N 164 LYS ( 168-) A N 200 LEU ( 204-) A N 217 GLU ( 221-) A N 241 TRP ( 245-) A N 244 ALA ( 248-) A N 256 PHE ( 260-) A N Only metal coordination for 91 HIS ( 94-) A NE2 Only metal coordination for 93 HIS ( 96-) A NE2 Only metal coordination for 116 HIS ( 119-) A ND1
Side-chain hydrogen bond acceptors buried inside the protein normally form hydrogen bonds within the protein. If there are any not hydrogen bonded in the optimized hydrogen bond network they will be listed here.
Waters are not listed by this option.
226 ASN ( 230-) A OD1
The score listed is the valency score. This number should be close to (preferably a bit above) 1.0 for the suggested ion to be a likely alternative for the water molecule. Ions listed in brackets are good alternate choices. *1 indicates that the suggested ion-type has been observed elsewhere in the PDB file too. *2 indicates that the suggested ion-type has been observed in the REMARK 280 cards of the PDB file. Ion-B and ION-B indicate that the B-factor of this water is high, or very high, respectively. H2O-B indicates that the B-factors of atoms that surround this water/ion are suspicious. See: swift.cmbi.ru.nl/teach/theory/ for a detailed explanation.
261 HOH ( 301 ) A O 1.12 K 4 Ion-B 261 HOH ( 403 ) A O 1.00 K 4 ION-B
The second part of the table mostly gives an impression of how well the model conforms to common refinement restraint values. The first part of the table shows a number of global quality indicators.
Structure Z-scores, positive is better than average:
1st generation packing quality : -0.401 2nd generation packing quality : 0.223 Ramachandran plot appearance : -1.265 chi-1/chi-2 rotamer normality : -1.455 Backbone conformation : -0.694
Bond lengths : 0.472 (tight) Bond angles : 0.812 Omega angle restraints : 0.712 (tight) Side chain planarity : 0.556 (tight) Improper dihedral distribution : 0.876 B-factor distribution : 0.528 Inside/Outside distribution : 0.950
The second part of the table mostly gives an impression of how well the model conforms to common refinement restraint values. The first part of the table shows a number of global quality indicators, which have been calibrated against structures of similar resolution.
Resolution found in PDB file : 1.90
Structure Z-scores, positive is better than average:
1st generation packing quality : 0.1 2nd generation packing quality : -0.2 Ramachandran plot appearance : -1.0 chi-1/chi-2 rotamer normality : -0.8 Backbone conformation : -1.1
Bond lengths : 0.472 (tight) Bond angles : 0.812 Omega angle restraints : 0.712 (tight) Side chain planarity : 0.556 (tight) Improper dihedral distribution : 0.876 B-factor distribution : 0.528 Inside/Outside distribution : 0.950 ==============
WHAT IF G.Vriend, WHAT IF: a molecular modelling and drug design program, J. Mol. Graph. 8, 52--56 (1990). WHAT_CHECK (verification routines from WHAT IF) R.W.W.Hooft, G.Vriend, C.Sander and E.E.Abola, Errors in protein structures Nature 381, 272 (1996). (see also http://swift.cmbi.ru.nl/gv/whatcheck for a course and extra inform Bond lengths and angles, protein residues R.Engh and R.Huber, Accurate bond and angle parameters for X-ray protein structure refinement, Acta Crystallogr. A47, 392--400 (1991). Bond lengths and angles, DNA/RNA G.Parkinson, J.Voitechovsky, L.Clowney, A.T.Bruenger and H.Berman, New parameters for the refinement of nucleic acid-containing structures Acta Crystallogr. D52, 57--64 (1996). DSSP W.Kabsch and C.Sander, Dictionary of protein secondary structure: pattern recognition of hydrogen bond and geometrical features Biopolymers 22, 2577--2637 (1983). Hydrogen bond networks R.W.W.Hooft, C.Sander and G.Vriend, Positioning hydrogen atoms by optimizing hydrogen bond networks in protein structures PROTEINS, 26, 363--376 (1996). Matthews' Coefficient B.W.Matthews Solvent content of Protein Crystals J. Mol. Biol. 33, 491--497 (1968). Protein side chain planarity R.W.W. Hooft, C. Sander and G. Vriend, Verification of protein structures: side-chain planarity J. Appl. Cryst. 29, 714--716 (1996). Puckering parameters D.Cremer and J.A.Pople, A general definition of ring puckering coordinates J. Am. Chem. Soc. 97, 1354--1358 (1975). Quality Control G.Vriend and C.Sander, Quality control of protein models: directional atomic contact analysis, J. Appl. Cryst. 26, 47--60 (1993). Ramachandran plot G.N.Ramachandran, C.Ramakrishnan and V.Sasisekharan, Stereochemistry of Polypeptide Chain Conformations J. Mol. Biol. 7, 95--99 (1963). Symmetry Checks R.W.W.Hooft, C.Sander and G.Vriend, Reconstruction of symmetry related molecules from protein data bank (PDB) files J. Appl. Cryst. 27, 1006--1009 (1994). Ion Checks I.D.Brown and K.K.Wu, Empirical Parameters for Calculating Cation-Oxygen Bond Valences Acta Cryst. B32, 1957--1959 (1975). M.Nayal and E.Di Cera, Valence Screening of Water in Protein Crystals Reveals Potential Na+ Binding Sites J.Mol.Biol. 256 228--234 (1996). P.Mueller, S.Koepke and G.M.Sheldrick, Is the bond-valence method able to identify metal atoms in protein structures? Acta Cryst. D 59 32--37 (2003). Checking checks K.Wilson, C.Sander, R.W.W.Hooft, G.Vriend, et al. Who checks the checkers J.Mol.Biol. (1998) 276,417-436.