WHAT IF Check report

This file was created 2011-12-18 from WHAT_CHECK output by a conversion script. If you are new to WHAT_CHECK, please study the pdbreport pages. There also exists a legend to the output.

Please note that you are looking at an abridged version of the output (all checks that gave normal results have been removed from this report). You can have a look at the Full report instead.

Verification log for pdb1zfk.ent

Checks that need to be done early-on in validation

Warning: Topology could not be determined for some ligands

Some ligands in the table below are too complicated for the automatic topology determination. WHAT IF uses a local copy of Daan van Aalten's Dundee PRODRG server to automatically generate topology information for ligands. Some molecules are too complicated for this software. If that happens, WHAT IF / WHAT-CHECK continue with a simplified topology that lacks certain information. Ligands with a simplified topology can, for example, not form hydrogen bonds, and that reduces the accuracy of all hydrogen bond related checking facilities.

The reason for topology generation failure is indicated. 'Atom types' indicates that the ligand contains atom types not known to PRODRUG. 'Attached' means that the ligand is covalently attached to a macromolecule. 'Size' indicates that the ligand has either too many atoms (or two or less which PRODRUG also cannot cope with), or too many bonds, angles, or torsion angles. 'Fragmented' is written when the ligand is not one fully covalently connected molecule but consists of multiple fragments. 'N/O only' is given when the ligand contains only N and/or O atoms. 'OK' indicates that the automatic topology generation succeeded.

 258 NR2   (1400-)  A  -         OK
 259 BE7   (1700-)  A  -         Atom types
 262 NR2   (1500-)  A  -         OK

Non-validating, descriptive output paragraph

Note: Ramachandran plot

In this Ramachandran plot x-signs represent glycines, squares represent prolines, and plus-signs represent the other residues. If too many plus- signs fall outside the contoured areas then the molecule is poorly refined (or worse). Proline can only occur in the narrow region around phi=-60 that also falls within the other contour islands.

In a colour picture, the residues that are part of a helix are shown in blue, strand residues in red. Preferred regions for helical residues are drawn in blue, for strand residues in red, and for all other residues in green. A full explanation of the Ramachandran plot together with a series of examples can be found at the WHAT_CHECK website.

Chain identifier: A

Coordinate problems, unexpected atoms, B-factor and occupancy checks

Warning: Missing atoms

The atoms listed in the table below are missing from the entry. If many atoms are missing, the other checks can become less sensitive. Be aware that it often happens that groups at the termini of DNA or RNA are really missing, so that the absence of these atoms normally is neither an error nor the result of poor electron density. Some of the atoms listed here might also be listed by other checks, most noticeably by the options in the previous section that list missing atoms in several categories. The plausible atoms with zero occupancy are not listed here, as they already got assigned a non-zero occupancy, and thus are no longer 'missing'.

   6 LYS   (1009-)  A      CG
   6 LYS   (1009-)  A      CD
   6 LYS   (1009-)  A      CE
   6 LYS   (1009-)  A      NZ
  50 GLN   (1053-)  A      CG
  50 GLN   (1053-)  A      CD
  50 GLN   (1053-)  A      OE1
  50 GLN   (1053-)  A      NE2

Warning: What type of B-factor?

WHAT IF does not yet know well how to cope with B-factors in case TLS has been used. It simply assumes that the B-factor listed on the ATOM and HETATM cards are the total B-factors. When TLS refinement is used that assumption sometimes is not correct. TLS seems not mentioned in the header of the PDB file. But anyway, if WHAT IF complains about your B-factors, and you think that they are OK, then check for TLS related B-factor problems first.

Obviously, the temperature at which the X-ray data was collected has some importance too:

Crystal temperature (K) :103.000

Note: B-factor plot

The average atomic B-factor per residue is plotted as function of the residue number.

Chain identifier: A

Nomenclature related problems

Warning: Aspartic acid convention problem

The aspartic acid residues listed in the table below have their chi-2 not between -90.0 and 90.0, or their proton on OD1 instead of OD2.

  31 ASP   (1034-)  A
  72 ASP   (1075-)  A
  82 ASP   (1085-)  A
 126 ASP   (1130-)  A

Warning: Glutamic acid convention problem

The glutamic acid residues listed in the table below have their chi-3 outside the -90.0 to 90.0 range, or their proton on OE1 instead of OE2.

  23 GLU   (1026-)  A
 183 GLU   (1187-)  A
 217 GLU   (1221-)  A
 232 GLU   (1236-)  A

Geometric checks

Warning: Low bond length variability

Bond lengths were found to deviate less than normal from the mean Engh and Huber [REF] and/or Parkinson et al [REF] standard bond lengths. The RMS Z-score given below is expected to be near 1.0 for a normally restrained data set. The fact that it is lower than 0.667 in this structure might indicate that too-strong restraints have been used in the refinement. This can only be a problem for high resolution X-ray structures.

RMS Z-score for bond lengths: 0.449
RMS-deviation in bond distances: 0.009

Warning: Unusual bond angles

The bond angles listed in the table below were found to deviate more than 4 sigma from standard bond angles (both standard values and sigma for protein residues have been taken from Engh and Huber [REF], for DNA/RNA from Parkinson et al [REF]). In the table below for each strange angle the bond angle and the number of standard deviations it differs from the standard values is given. Please note that disulphide bridges are neglected. Atoms starting with "-" belong to the previous residue in the sequence.

   7 HIS   (1010-)  A      CG   ND1  CE1 110.08    4.5
  12 HIS   (1015-)  A      CG   ND1  CE1 112.62    7.0
  12 HIS   (1015-)  A      CB   CG   CD2 135.75    5.1
  14 HIS   (1017-)  A      CA   CB   CG  109.55   -4.2
  16 ASP   (1019-)  A      CA   CB   CG  108.51   -4.1
  24 ARG   (1027-)  A      CA   CB   CG  127.09    6.5
  33 HIS   (1036-)  A      CG   ND1  CE1 110.41    4.8
  55 ARG   (1058-)  A      CB   CG   CD  105.75   -4.2
  64 ASN   (1067-)  A      ND2  CG   OD1 127.44    4.8
  67 PHE   (1070-)  A      CA   CB   CG  109.59   -4.2
  73 LYS   (1076-)  A     -O   -C    N   116.47   -4.1
  90 PHE   (1093-)  A      CA   CB   CG  120.61    6.8
  98 ASP   (1101-)  A      CA   CB   CG  117.16    4.6
 100 GLN   (1103-)  A      NE2  CD   OE1 117.29   -5.3
 104 HIS   (1107-)  A      CA   CB   CG  108.72   -5.1
 104 HIS   (1107-)  A      CG   ND1  CE1 110.59    5.0
 108 LYS   (1111-)  A     -C    N    CA  129.32    4.2
 123 LYS   (1127-)  A     -C    N    CA  113.87   -4.3
 126 ASP   (1130-)  A      CA   CB   CG  117.23    4.6
 155 LYS   (1159-)  A     -C    N    CA  112.12   -5.3
 161 ASP   (1165-)  A     -C    N    CA  113.39   -4.6
 163 ILE   (1167-)  A      CA   CB   CG1 117.28    4.0
 184 SER   (1188-)  A      CA   C    O   113.58   -4.2
 186 ASP   (1190-)  A     -O   -C    N   113.66   -5.8
 186 ASP   (1190-)  A     -CA  -C    N   124.46    4.1
 186 ASP   (1190-)  A     -C    N    CA  131.28    5.3
 186 ASP   (1190-)  A      CA   CB   CG  117.78    5.2
 187 TYR   (1191-)  A     -C    N    CA  131.11    5.2
 222 PHE   (1226-)  A      CA   CB   CG  119.93    6.1
 223 ARG   (1227-)  A      CD   NE   CZ  132.41    6.0
 226 ASN   (1230-)  A      CA   CB   CG  117.51    4.9
 227 PHE   (1231-)  A      CA   CB   CG  120.07    6.3
 235 GLU   (1239-)  A      CA   CB   CG  123.24    4.6
 248 LYS   (1252-)  A      C    CA   CB  119.05    4.7
 249 ASN   (1253-)  A     -C    N    CA  139.51    9.9
 251 GLN   (1255-)  A      CB   CG   CD  119.71    4.2
 251 GLN   (1255-)  A      NE2  CD   OE1 117.88   -4.7

Error: Nomenclature error(s)

Checking for a hand-check. WHAT IF has over the course of this session already corrected the handedness of atoms in several residues. These were administrative corrections. These residues are listed here.

  23 GLU   (1026-)  A
  31 ASP   (1034-)  A
  72 ASP   (1075-)  A
  82 ASP   (1085-)  A
 126 ASP   (1130-)  A
 183 GLU   (1187-)  A
 217 GLU   (1221-)  A
 232 GLU   (1236-)  A

Torsion-related checks

Warning: Torsion angle evaluation shows unusual residues

The residues listed in the table below contain bad or abnormal torsion angles.

These scores give an impression of how `normal' the torsion angles in protein residues are. All torsion angles except omega are used for calculating a `normality' score. Average values and standard deviations were obtained from the residues in the WHAT IF database. These are used to calculate Z-scores. A residue with a Z-score of below -2.0 is poor, and a score of less than -3.0 is worrying. For such residues more than one torsion angle is in a highly unlikely position.

 163 ILE   (1167-)  A    -2.2
 159 VAL   (1163-)  A    -2.1
  19 ILE   (1022-)  A    -2.1
 172 PHE   (1176-)  A    -2.1
  89 GLN   (1092-)  A    -2.1
 147 GLY   (1151-)  A    -2.1

Warning: Backbone evaluation reveals unusual conformations

The residues listed in the table below have abnormal backbone torsion angles.

Residues with `forbidden' phi-psi combinations are listed, as well as residues with unusual omega angles (deviating by more than 3 sigma from the normal value). Please note that it is normal if about 5 percent of the residues is listed here as having unusual phi-psi combinations.

  26 SER   (1029-)  A  PRO omega poor
  28 VAL   (1031-)  A  omega poor
  54 LEU   (1057-)  A  omega poor
  72 ASP   (1075-)  A  Poor phi/psi
  73 LYS   (1076-)  A  Poor phi/psi
  83 GLY   (1086-)  A  omega poor
 108 LYS   (1111-)  A  Poor phi/psi
 174 ASN   (1178-)  A  Poor phi/psi
 193 SER   (1197-)  A  omega poor
 197 PRO   (1201-)  A  PRO omega poor
 199 LEU   (1203-)  A  Poor phi/psi
 201 GLU   (1205-)  A  omega poor
 239 ASP   (1243-)  A  Poor phi/psi
 248 LYS   (1252-)  A  Poor phi/psi
 249 ASN   (1253-)  A  Poor phi/psi
 chi-1/chi-2 correlation Z-score : -0.499

Warning: Unusual backbone conformations

For the residues listed in the table below, the backbone formed by itself and two neighbouring residues on either side is in a conformation that is not seen very often in the database of solved protein structures. The number given in the table is the number of similar backbone conformations in the database with the same amino acid in the centre.

For this check, backbone conformations are compared with database structures using C-alpha superpositions with some restraints on the backbone oxygen positions.

A residue mentioned in the table can be part of a strange loop, or there might be something wrong with it or its directly surrounding residues. There are a few of these in every protein, but in any case it is worth looking at!

   4 TYR   (1007-)  A      0
   7 HIS   (1010-)  A      0
  16 ASP   (1019-)  A      0
  17 PHE   (1020-)  A      0
  21 LYS   (1024-)  A      0
  24 ARG   (1027-)  A      0
  25 GLN   (1028-)  A      0
  26 SER   (1029-)  A      0
  35 ALA   (1038-)  A      0
  42 LYS   (1045-)  A      0
  47 SER   (1050-)  A      0
  50 GLN   (1053-)  A      0
  59 ASN   (1062-)  A      0
  61 HIS   (1064-)  A      0
  62 ALA   (1065-)  A      0
  69 ASP   (1072-)  A      0
  70 SER   (1073-)  A      0
  72 ASP   (1075-)  A      0
  74 ALA   (1077-)  A      0
  77 LYS   (1080-)  A      0
  80 PRO   (1083-)  A      0
  82 ASP   (1085-)  A      0
  89 GLN   (1092-)  A      0
  96 SER   (1099-)  A      0
 100 GLN   (1103-)  A      0
And so on for a total of 121 lines.

Warning: Unusual PRO puckering amplitudes

The proline residues listed in the table below have a puckering amplitude that is outside of normal ranges. Puckering parameters were calculated by the method of Cremer and Pople [REF]. Normal PRO rings have a puckering amplitude Q between 0.20 and 0.45 Angstrom. If Q is lower than 0.20 Angstrom for a PRO residue, this could indicate disorder between the two different normal ring forms (with C-gamma below and above the ring, respectively). If Q is higher than 0.45 Angstrom something could have gone wrong during the refinement. Be aware that this is a warning with a low confidence level. See: Who checks the checkers? Four validation tools applied to eight atomic resolution structures [REF]

  10 PRO   (1013-)  A    0.45 HIGH
  18 PRO   (1021-)  A    0.11 LOW
 151 PRO   (1155-)  A    0.45 HIGH

Bump checks

Error: Abnormally short interatomic distances

The pairs of atoms listed in the table below have an unusually short interactomic distance; each bump is listed in only one direction.

The contact distances of all atom pairs have been checked. Two atoms are said to `bump' if they are closer than the sum of their Van der Waals radii minus 0.40 Angstrom. For hydrogen bonded pairs a tolerance of 0.55 Angstrom is used. The first number in the table tells you how much shorter that specific contact is than the acceptable limit. The second distance is the distance between the centres of the two atoms. Although we believe that two water atoms at 2.4 A distance are too close, we only report water pairs that are closer than this rather short distance.

The last text-item on each line represents the status of the atom pair. If the final column contains the text 'HB', the bump criterion was relaxed because there could be a hydrogen bond. Similarly relaxed criteria are used for 1-3 and 1-4 interactions (listed as 'B2' and 'B3', respectively). BL indicates that the B-factors of the clashing atoms have a low B-factor thereby making this clash even more worrisome. INTRA and INTER indicate whether the clashes are between atoms in the same asymmetric unit, or atoms in symmetry related asymmetric units, respectively.

 221 LYS   (1225-)  A      NZ  <->  263 HOH   (3057 )  A      O      0.21    2.49  INTRA
  68 ASP   (1071-)  A      O   <->   73 LYS   (1076-)  A      NZ     0.20    2.50  INTRA
   6 LYS   (1009-)  A      O   <->   12 HIS   (1015-)  A      NE2    0.18    2.52  INTRA
 129 LYS   (1133-)  A      NZ  <->  263 HOH   (3137 )  A      O      0.12    2.58  INTRA
 171 ASP   (1175-)  A      OD2 <->  263 HOH   (3260 )  A      O      0.11    2.29  INTRA BF
  31 ASP   (1034-)  A      OD1 <->  263 HOH   (3250 )  A      O      0.10    2.30  INTRA
  66 GLU   (1069-)  A      OE2 <->  263 HOH   (3030 )  A      O      0.10    2.30  INTRA
  43 PRO   (1046-)  A      O   <->  263 HOH   (3148 )  A      O      0.10    2.30  INTRA
 210 GLU   (1214-)  A      OE2 <->  263 HOH   (3256 )  A      O      0.10    2.30  INTRA
 104 HIS   (1107-)  A      NE2 <->  190 TYR   (1194-)  A      OH     0.08    2.62  INTRA BL
 262 NR2   (1500-)  A      O23 <->  263 HOH   (3030 )  A      O      0.08    2.32  INTRA
 216 SER   (1220-)  A      OG  <->  263 HOH   (3075 )  A      O      0.07    2.33  INTRA
 230 GLU   (1234-)  A      OE2 <->  263 HOH   (3263 )  A      O      0.07    2.33  INTRA
 109 LYS   (1112-)  A      NZ  <->  263 HOH   (3104 )  A      O      0.05    2.65  INTRA
 152 GLY   (1156-)  A      N   <->  263 HOH   (3152 )  A      O      0.02    2.68  INTRA
  72 ASP   (1075-)  A      N   <->  263 HOH   (3225 )  A      O      0.01    2.69  INTRA
  72 ASP   (1075-)  A      OD1 <->   86 ARG   (1089-)  A      NE     0.01    2.69  INTRA
 249 ASN   (1253-)  A      OD1 <->  263 HOH   (3088 )  A      O      0.01    2.39  INTRA BF
  33 HIS   (1036-)  A      ND1 <->  263 HOH   (3219 )  A      O      0.01    2.69  INTRA
  71 GLN   (1074-)  A      NE2 <->  263 HOH   (3245 )  A      O      0.01    2.69  INTRA

Packing, accessibility and threading

Note: Inside/Outside RMS Z-score plot

The Inside/Outside distribution normality RMS Z-score over a 15 residue window is plotted as function of the residue number. High areas in the plot (above 1.5) indicate unusual inside/outside patterns.

Chain identifier: A

Warning: Abnormal packing environment for some residues

The residues listed in the table below have an unusual packing environment.

The packing environment of the residues is compared with the average packing environment for all residues of the same type in good PDB files. A low packing score can indicate one of several things: Poor packing, misthreading of the sequence through the density, crystal contacts, contacts with a co-factor, or the residue is part of the active site. It is not uncommon to see a few of these, but in any case this requires further inspection of the residue.

   7 HIS   (1010-)  A      -6.53
  97 LEU   (1100-)  A      -5.08

Note: Quality value plot

The quality value smoothed over a 10 residue window is plotted as function of the residue number. Low areas in the plot (below -2.0) indicate unusual packing.

Chain identifier: A

Note: Second generation quality Z-score plot

The second generation quality Z-score smoothed over a 10 residue window is plotted as function of the residue number. Low areas in the plot (below -1.3) indicate unusual packing.

Chain identifier: A

Water, ion, and hydrogenbond related checks

Warning: Water molecules need moving

The water molecules listed in the table below were found to be significantly closer to a symmetry related non-water molecule than to the ones given in the coordinate file. For optimal viewing convenience revised coordinates for these water molecules should be given.

The number in brackets is the identifier of the water molecule in the input file. Suggested coordinates are also given in the table. Please note that alternative conformations for protein residues are not taken into account for this calculation. If you are using WHAT IF / WHAT-CHECK interactively, then the moved waters can be found in PDB format in the file: MOVEDH2O.pdb.

 263 HOH   (3102 )  A      O      7.68   22.14   15.14
 263 HOH   (3127 )  A      O     10.10    3.21   33.78
 263 HOH   (3232 )  A      O     21.17   13.53   10.60
 263 HOH   (3243 )  A      O     22.35  -15.22   19.79
 263 HOH   (3246 )  A      O      6.81    1.76   42.98
 263 HOH   (3253 )  A      O     17.97  -17.96    6.19
 263 HOH   (3254 )  A      O     15.31   -9.84   37.70
 263 HOH   (3255 )  A      O    -10.17    7.32    9.94
 263 HOH   (3257 )  A      O     35.03    0.34   28.34
 263 HOH   (3265 )  A      O      9.64   12.48    0.35

Error: Water molecules without hydrogen bonds

The water molecules listed in the table below do not form any hydrogen bonds, neither with the protein or DNA/RNA, nor with other water molecules. This is a strong indication of a refinement problem. The last number on each line is the identifier of the water molecule in the input file.

 263 HOH   (3229 )  A      O
Metal-coordinating Histidine residue  91 fixed to   1
Metal-coordinating Histidine residue  93 fixed to   1
Metal-coordinating Histidine residue 116 fixed to   1

Error: HIS, ASN, GLN side chain flips

Listed here are Histidine, Asparagine or Glutamine residues for which the orientation determined from hydrogen bonding analysis are different from the assignment given in the input. Either they could form energetically more favourable hydrogen bonds if the terminal group was rotated by 180 degrees, or there is no assignment in the input file (atom type 'A') but an assignment could be made. Be aware, though, that if the topology could not be determined for one or more ligands, then this option will make errors.

  64 ASN   (1067-)  A
 100 GLN   (1103-)  A
 174 ASN   (1178-)  A

Warning: Buried unsatisfied hydrogen bond donors

The buried hydrogen bond donors listed in the table below have a hydrogen atom that is not involved in a hydrogen bond in the optimized hydrogen bond network.

Hydrogen bond donors that are buried inside the protein normally use all of their hydrogens to form hydrogen bonds within the protein. If there are any non hydrogen bonded buried hydrogen bond donors in the structure they will be listed here. In very good structures the number of listed atoms will tend to zero.

Waters are not listed by this option.

   7 HIS   (1010-)  A      N
  28 VAL   (1031-)  A      N
  37 TYR   (1040-)  A      N
  49 ASP   (1052-)  A      N
  64 ASN   (1067-)  A      ND2
  71 GLN   (1074-)  A      N
  97 LEU   (1100-)  A      N
 200 LEU   (1204-)  A      N
 215 SER   (1219-)  A      OG
 226 ASN   (1230-)  A      ND2
 241 TRP   (1245-)  A      N
 256 PHE   (1260-)  A      N
 261 GOL   (1900-)  A      O2
Only metal coordination for   91 HIS  (1094-) A      NE2
Only metal coordination for   93 HIS  (1096-) A      NE2
Only metal coordination for  116 HIS  (1119-) A      ND1

Warning: Buried unsatisfied hydrogen bond acceptors

The buried side-chain hydrogen bond acceptors listed in the table below are not involved in a hydrogen bond in the optimized hydrogen bond network.

Side-chain hydrogen bond acceptors buried inside the protein normally form hydrogen bonds within the protein. If there are any not hydrogen bonded in the optimized hydrogen bond network they will be listed here.

Waters are not listed by this option.

 235 GLU   (1239-)  A      OE1

Warning: Unusual water packing

We implemented the ion valence determination method of Brown and Wu [REF] similar to Nayal and Di Cera [REF] and Mueller, Koepke and Sheldrick [REF]. It must be stated that the validation of ions in PDB files is very difficult. Ideal ion-ligand distances often differ no more than 0.1 Angstrom, and in a 2.0 Angstrom resolution structure 0.1 Angstrom is not very much. Nayal and Di Cera showed that this method nevertheless has great potential for detecting water molecules that actually should be metal ions. The method has not been extensively validated, though. Part of our implementation (comparing waters with multiple ion types) is even fully new and despite that we see it work well in the few cases that are trivial, we must emphasize that this method is untested.

The score listed is the valency score. This number should be close to (preferably a bit above) 1.0 for the suggested ion to be a likely alternative for the water molecule. Ions listed in brackets are good alternate choices. *1 indicates that the suggested ion-type has been observed elsewhere in the PDB file too. *2 indicates that the suggested ion-type has been observed in the REMARK 280 cards of the PDB file. Ion-B and ION-B indicate that the B-factor of this water is high, or very high, respectively. H2O-B indicates that the B-factors of atoms that surround this water/ion are suspicious. See: swift.cmbi.ru.nl/teach/theory/ for a detailed explanation.

 263 HOH   (3091 )  A      O  1.00  K  4 H2O-B
 263 HOH   (3153 )  A      O  0.91  K  5 Ion-B
 263 HOH   (3227 )  A      O  0.87  K  5 Ion-B
 263 HOH   (3250 )  A      O  0.92 NA  5 *2 ION-B

Final summary

Note: Summary report for users of a structure

This is an overall summary of the quality of the structure as compared with current reliable structures. This summary is most useful for biologists seeking a good structure to use for modelling calculations.

The second part of the table mostly gives an impression of how well the model conforms to common refinement restraint values. The first part of the table shows a number of global quality indicators.


Structure Z-scores, positive is better than average:

  1st generation packing quality :  -0.039
  2nd generation packing quality :   0.500
  Ramachandran plot appearance   :  -1.472
  chi-1/chi-2 rotamer normality  :  -0.499
  Backbone conformation          :  -0.956

RMS Z-scores, should be close to 1.0:
  Bond lengths                   :   0.449 (tight)
  Bond angles                    :   1.289
  Omega angle restraints         :   1.161
  Side chain planarity           :   0.641 (tight)
  Improper dihedral distribution :   0.730
  B-factor distribution          :   1.417
  Inside/Outside distribution    :   0.966

Note: Summary report for depositors of a structure

This is an overall summary of the quality of the X-ray structure as compared with structures solved at similar resolutions. This summary can be useful for a crystallographer to see if the structure makes the best possible use of the data. Warning. This table works well for structures solved in the resolution range of the structures in the WHAT IF database, which is presently (summer 2008) mainly 1.1 - 1.3 Angstrom. The further the resolution of your file deviates from this range the more meaningless this table becomes.

The second part of the table mostly gives an impression of how well the model conforms to common refinement restraint values. The first part of the table shows a number of global quality indicators, which have been calibrated against structures of similar resolution.

Resolution found in PDB file : 1.56


Structure Z-scores, positive is better than average:

  1st generation packing quality :   0.3
  2nd generation packing quality :  -0.5
  Ramachandran plot appearance   :  -2.0
  chi-1/chi-2 rotamer normality  :  -1.0
  Backbone conformation          :  -1.4

RMS Z-scores, should be close to 1.0:
  Bond lengths                   :   0.449 (tight)
  Bond angles                    :   1.289
  Omega angle restraints         :   1.161
  Side chain planarity           :   0.641 (tight)
  Improper dihedral distribution :   0.730
  B-factor distribution          :   1.417
  Inside/Outside distribution    :   0.966
==============

WHAT IF
    G.Vriend,
      WHAT IF: a molecular modelling and drug design program,
    J. Mol. Graph. 8, 52--56 (1990).

WHAT_CHECK (verification routines from WHAT IF)
    R.W.W.Hooft, G.Vriend, C.Sander and E.E.Abola,
      Errors in protein structures
    Nature 381, 272 (1996).
    (see also http://swift.cmbi.ru.nl/gv/whatcheck for a course and extra inform

Bond lengths and angles, protein residues
    R.Engh and R.Huber,
      Accurate bond and angle parameters for X-ray protein structure
      refinement,
    Acta Crystallogr. A47, 392--400 (1991).

Bond lengths and angles, DNA/RNA
    G.Parkinson, J.Voitechovsky, L.Clowney, A.T.Bruenger and H.Berman,
      New parameters for the refinement of nucleic acid-containing structures
    Acta Crystallogr. D52, 57--64 (1996).

DSSP
    W.Kabsch and C.Sander,
      Dictionary of protein secondary structure: pattern
      recognition of hydrogen bond and geometrical features
    Biopolymers 22, 2577--2637 (1983).

Hydrogen bond networks
    R.W.W.Hooft, C.Sander and G.Vriend,
      Positioning hydrogen atoms by optimizing hydrogen bond networks in
      protein structures
    PROTEINS, 26, 363--376 (1996).

Matthews' Coefficient
    B.W.Matthews
      Solvent content of Protein Crystals
    J. Mol. Biol. 33, 491--497 (1968).

Protein side chain planarity
    R.W.W. Hooft, C. Sander and G. Vriend,
      Verification of protein structures: side-chain planarity
    J. Appl. Cryst. 29, 714--716 (1996).

Puckering parameters
    D.Cremer and J.A.Pople,
      A general definition of ring puckering coordinates
    J. Am. Chem. Soc. 97, 1354--1358 (1975).

Quality Control
    G.Vriend and C.Sander,
      Quality control of protein models: directional atomic
      contact analysis,
    J. Appl. Cryst. 26, 47--60 (1993).

Ramachandran plot
    G.N.Ramachandran, C.Ramakrishnan and V.Sasisekharan,
      Stereochemistry of Polypeptide Chain Conformations
    J. Mol. Biol. 7, 95--99 (1963).

Symmetry Checks
    R.W.W.Hooft, C.Sander and G.Vriend,
      Reconstruction of symmetry related molecules from protein
      data bank (PDB) files
    J. Appl. Cryst. 27, 1006--1009 (1994).

Ion Checks
    I.D.Brown and K.K.Wu,
      Empirical Parameters for Calculating Cation-Oxygen Bond Valences
    Acta Cryst. B32, 1957--1959 (1975).

    M.Nayal and E.Di Cera,
      Valence Screening of Water in Protein Crystals Reveals Potential Na+
      Binding Sites
    J.Mol.Biol. 256 228--234 (1996).

    P.Mueller, S.Koepke and G.M.Sheldrick,
      Is the bond-valence method able to identify metal atoms in protein
      structures?
    Acta Cryst. D 59 32--37 (2003).

Checking checks
    K.Wilson, C.Sander, R.W.W.Hooft, G.Vriend, et al.
      Who checks the checkers
    J.Mol.Biol. (1998) 276,417-436.